Osstem® Compatible Components — Regular Platform Multi-Unit & Open-Tray Transfer
Updated Jul 20, 2026
International shipping from Israel depends on the SKU, destination and service. Stock, price, charge and timing are confirmed at checkout; no local store, warehouse, inventory or pickup.
Clinics and laboratories that place Osstem® implants restore, case after case, on the same interface: the Regular platform with its internal connection. Dental Solutions supplies Osstem® compatible components for exactly that interface — an angled multi-unit abutment supplied as a set with its holder mount and screw for screw-retained full-arch work, and an open-tray transfer impression coping — machined in titanium and sold online at supplier-direct prices from $8.50. This page explains what our compatibility claim covers, what each component offers, and how the two slot into a full-arch workflow on the Osstem® Regular platform. It is written for licensed dental professionals: implantologists, oral surgeons, implant clinics and dental laboratories.
What Osstem® Compatible Means: Mechanical Fit with the Regular Platform
Compatibility, as we state it, means exactly one verifiable thing: mechanical fit with the referenced connection platform. These components are machined to the connection geometry of the Osstem® Regular platform — the internal-connection interface your restorative routine is built around — and listed with product-specific documentation to verify. The claim concerns geometry, not brand equivalence: these are not Osstem® original parts, and we claim nothing beyond the fit our own catalog specifies.
In practice, the routine stays the one your team already runs every day: confirm that the placed fixture carries the Regular platform, then restore with components indexed to it. Torque values and component selection follow the IFU of your restorative protocol and your clinical judgment. Both products on this page live in our Osstem® compatible category, part of the wider compatibility catalog that also covers Straumann®, Neodent® GM and MegaGen AnyRidge® platforms — useful when one purchasing account has to serve several implant systems.
Angled Multi-Unit + Holder Mount + Screw — 17° / 30°
Open-Tray Transfer Impression Coping for the Osstem® Regular Platform
The Transfer Open Tray Impression Coping | Compatible OSSTEM REGULAR® carries the implant position from the chair to the laboratory in the conventional pathway: seat it on the Regular-platform fixture, take the open-tray impression, and the transfer travels inside the impression so the lab can reproduce the connection in the master cast. It is a titanium impression component offered in a single open-tray configuration at $8.50 per unit — the kind of consumable most practices order in quantity alongside the rest of the restorative order. The full range of open- and closed-tray impression copings covers our other platforms the same way.
| Specification | Detail |
|---|---|
| Compatibility | Mechanical fit with the Osstem® Regular platform |
| Technique | Open-tray impression |
| Configuration | Single variant, ready for the open-tray workflow |
| Material | Titanium |
| Price | $8.50 per unit, with automatic quantity discounts |
Full-Arch Work on the Osstem® Regular Platform
Angled multi-unit abutments earn their place in screw-retained full-arch restorations, where implants are rarely parallel: the 17° and 30° angulations bring divergent fixtures onto a common prosthetic axis, and the 2.5–5.0 mm height options give room to match each site. On the Osstem® Regular platform the two components divide the work naturally — the angled multi-units establish the prosthetic platform for the arch, while the open-tray transfer serves every case that calls for an implant-level impression. For a component-by-component walkthrough of that workflow, see our multi-unit abutment guide; the complete multi-unit abutments category holds 20 active products across straight, angled and platform-specific lines if you restore more than one system.
Ordering Direct: B2B Pricing, Stock and Shipping
Frequently Asked Questions
Which Osstem® platform are these components compatible with?
Both are machined for mechanical fit with the Osstem® Regular platform. Confirm the platform of the placed fixture before ordering, and verify fit per the IFU and your clinical judgment.
What angulations and heights does the angled multi-unit offer?
What is included with the angled multi-unit?
Each set includes the angled multi-unit abutment, its holder mount and the fixation screw, machined from titanium Grade 5 alloy (Ti-6Al-4V ELI).
What torque should I apply to these components?
We do not publish torque recommendations for third-party systems. Torque and component selection follow the IFU of your restorative protocol and your clinical judgment.
International shipping subject to eligibility and checkout
What is the return policy?
Unopened products may be returned within 10 days. Sterile items are returnable only while the sterile barrier is intact; defective items are replaced, with return shipping covered by us.
Osstem® is a registered trademark of Osstem Implant Co., Ltd. Dental Solutions is not affiliated with, endorsed by, or sponsored by Osstem Implant Co., Ltd. Other brand names mentioned are trademarks of their respective owners and are used only to indicate compatibility. Compatibility refers to mechanical fit with the referenced connection platform.